|
|
Build Your Online Product Catalogs?
| Product Name: |
DRY INKJET MEDICAL FILM
|
| Supply Ability: |
|
| Related proudcts |
medical, film, pet film, |
| Specifications |
Model NO.: MF2x |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
2000kg |
| Unit Price: |
|
|
Features & Application
1.Base is PET, it include image layer and protect layer on different side of bluish polyester bases, and there are no sensitive silver halide in both layer.
2.It fit for ink-jet printer to print digital image which was processed and stored in the computer, to attain the enhanced x-ray image quality.
3.Films are insensitive to light, daylight film loading.
4.It is environmentally friendly since the process procedure was saved and free of the Chemicals, no wet processing, no darkroom, put an end to the traditional film of the silver pollution.
5.Low fog, high sharpness, high max density, bright tone and conveniently to use.
6.This film is direct printing consumable, it co***tible with Canon, Epson and HP inkjet printer, and model #PRO-10 of Canon is the best choice. If you use it with other printer, please pre-test in order to fix the best working conditions.
7.Features:
8.*Based on PET,no sensitive silver halide on two sides..
9.*Fit for inkjet printer to print digital image
10.*Films are insensitive to lamplight and sunlight.
11.*Environment friendly
12.*Low fog, high sharpness,high max density, bright tone and use conveniently.
Storage
Please store the film in cool and dry place without dust. Keep away from direct sunlight, acid or alkaline gas. ***ails as follows.
Storage before use
1.Temperature 10°C~23°C, humidity 30%~65%RH, keep away from the heat resource.
2.Gas, There are no hydrogen sulfide, ammonia, sulfur dioxide, formaldehyde, and any other alkaline gas, etc.
3.Pile, Please keep film upright to avoid the bad influence caused by pressure.
4.The validity time is 18 months under above conditions.
Conditions of usage
The best condition of usage as following, temperature 18°C~24°C, humidity 50%~65%RH.
Notes
1. Store the film under the conditions specified above.
2. Take the film out of the cool place and place the film with the package in the place where the film will be used for at least 4 hours, to avoid the steam concentrate on the film and damage |
| Company: |
BRIGHTER (HK) INDUSTRIAL CO.,LIMITED
|
| Contact: |
Ms. Bonnie Cheng |
| Address: |
#4F,No.21 Zhongshan Yi Rd,Guangzhou,China |
| Postcode: |
|
| Tel: |
020-87381335 |
| Fax: |
020-87381336-808 |
| E-mail: |
|
|
|
|
Home
